natural stone look for your floor
Stone coating, also called epoxy quartz coating or color sand epoxy floor coating, is a floor coating made with colored quartz sand (small stone grains) and strong epoxy resin. It makes one smooth floor with no joints. It looks like natural stone or marble, but it is stronger and easier to clean. You get the beauty of stone without the high cost of real stone slabs.
You can mix different colors of quartz sand to make your own design, even a rich marble texture coating look. In Bangladesh, people also call it colour sand epoxy floor coating. Whatever name you know it by, it is a great choice for factories, shopping malls, hospitals, offices, hotels and homes.
Our skilled team does the full job: floor grinding, primer, leveling and the final stone coating. With quality material and careful work, you get a clean, strong and beautiful floor that looks good for many years, even with heavy daily use and regular washing.
strong, safe and beautiful
In Bangladesh, floors face a lot: heavy foot traffic, trolleys, water, dust and hot, humid weather. Normal tiles crack, the joints get dirty and floor paint wears off fast. Stone coating solves these problems for good and keeps your floor looking new.
It is very hard and does not wear out easily. It is waterproof and slip-resistant. It resists acid, alkali and many chemicals. It also stops the growth of mold and bacteria, so the floor stays hygienic. It is fire-resistant, non-toxic, eco-friendly and low in VOC (very little smell), so it is safe for people, even in homes and hospitals.
There are no joints, so dirt has nowhere to hide. You can clean it with just a mop. It is a smart decorative flooring choice that gives you both beauty and strength, and saves you repair costs for many years.
simple, clear and useful
See what stone coating gives you and where you can use it. It works well in any place that needs a clean, strong and good-looking floor.
Benefits
- Natural stone look in many colors
- Seamless floor with no joints
- Very strong and wear-resistant
- Waterproof and slip-resistant
- Acid, alkali and chemical resistant
- Stops mold and bacteria
- Non-toxic, eco-friendly and low smell
- Easy to clean, low maintenance
Usages Area
- Factories and garments (RMG) factories
- Food and pharmaceutical factories
- Hospitals, clinics and laboratories
- Shopping malls and showrooms
- Airports, metro rail stations and exhibition halls
- Offices, banks and corporate buildings
- Hotels, restaurants and community centers
- Schools, universities and homes
tested strength and quality
Stone coating is made to last. Its hardness is Shore D 80 or more, so it does not get scratched or damaged easily. It holds the concrete with a bond strength of 2 MPa or more, so it does not peel off. In the wear test it loses only 0.03 g or less, which means it stays good even with heavy foot traffic and trolleys every day.
It can take strong hits too, with an impact resistance of 60 MPa or more. It also has good electrical strength (20 MV/m), which makes it a safe choice for electronics and telecom areas. That is why it is trusted in factories, hospitals and busy shopping malls.
Drying is quick. At 25°C, the surface dries within 6 hours and the floor fully dries within 24 hours, so your work stops for a short time only. In hot Bangladesh weather the material sets faster, so our team mixes small batches and works carefully for a perfect finish.
step by step, done right
First, we grind the floor to make it a little rough so the coating holds strongly. We also repair dust, hollow spots, broken parts and oil marks, and make the floor clean and dry. Then we apply 1 or 2 coats of primer by brush, roller or spray. Old floors get one extra coat of primer for a stronger base.
If the floor has small holes or cracks, we add a leveling layer of mortar and putty to make it smooth and hard. Next, we mix the colored quartz material well, pour it and spread it evenly with a trowel, starting from the corners. We keep even pressure, so there are no marks or joints. This gives the stone coating a strong, flat and even finish.
Finally, we roll a spiked roller over the wet coating to remove air bubbles. The result is a smooth, even and beautiful stone floor, ready to serve you for years. Our team keeps the site clean and finishes the work on time, with as little trouble for your business as possible.
what you get
Our epoxy quartz stone coating material comes in two parts. Part A is the main material: epoxy resin already mixed with colored quartz sand, so it is ready to use. Part B is the hardener that makes it set hard and strong.
Part A comes in 8 kg and 20 kg packs, and Part B comes in 1 kg and 2.5 kg packs. Mix them by weight in the ratio A : B = 8 : 1. So, an 8 kg Part A goes with a 1 kg Part B, and a 20 kg Part A goes with a 2.5 kg Part B.
After mixing, use the material within 40 minutes at 20°C, 35 minutes at 25°C and 30 minutes at 30°C. Both parts can be stored for 1 year at 0°C to 30°C. Keep the packs sealed in a cool, airy place, away from fire, moisture and sunlight.
Need material or full application? Contact Fountech for quantity and price.
Stone Coating FAQs
What is stone coating?
Stone coating is a floor coating made with colored quartz sand and epoxy resin. It gives a natural stone look and makes a strong, seamless floor with no joints.
Where can I use stone coating?
You can use it in factories, garments, food and pharma plants, hospitals, shopping malls, showrooms, offices, hotels, schools and homes. It is good for any place that needs a clean and strong floor.
How long does it take to dry?
At normal temperature (25°C), the surface dries within 6 hours and the floor fully dries within 24 hours. Our team will tell you when the floor is ready for full use.
Is stone coating safe and easy to clean?
Yes. It is non-toxic, eco-friendly and low in VOC. It stops mold and bacteria, and since there are no joints, you can clean it easily with a mop.
Does Fountech provide stone coating in Bangladesh?
Yes. Fountech provides complete stone coating service in Bangladesh, from floor preparation to the final finish. Contact our team for color options and a quotation.
Is stone coating the same as epoxy quartz coating or color sand epoxy floor coating?
Yes. Stone coating, epoxy quartz coating and color sand (colour sand) epoxy floor coating are names for the same kind of floor: epoxy resin mixed with colored quartz sand. With the right colors, it can also give a marble texture coating look.
What are the pack sizes of Part A and Part B?
Part A comes in 8 kg and 20 kg packs, and Part B comes in 1 kg and 2.5 kg packs. Mix them by weight at A : B = 8 : 1, which means 8 kg Part A with 1 kg Part B, or 20 kg Part A with 2.5 kg Part B.
